How to Connect HP Bluetooth Printer to Wi-Fi? (Full Guide)
- Lary Whitney
- Dec 13, 2025
- 4 min read
HP printers are mostly multifunctional, and they have multiple connectivity options such as USB, Bluetooth, and Wi-Fi. This means it's possible to connect an HP Bluetooth printer to Wi-Fi. If you are wondering how to set up this connection, I can teach you the whole process in a few simple steps. There are a few ways to set up this connection using the HP Smart app, the WPS push button, or the printer’s internal settings. So if you want Learn 'How to Connect HP Printer to Wi-Fi', read this full guide to set up the connection right now.
Method 1: Through the HP Smart App
HP printers have a dedicated application for setting up HP printers on a computer or mobile device via a wireless connection. Here are the steps to connect the printer to Wi-Fi. (Note: Ensure whether your HP Bluetooth printer supports Wi-Fi connectivity.)
HP printers have special buttons to enter setup mode. Press the Wi-Fi and Cancel buttons together for 3 seconds and then release them.
The wireless light on the printer will start blinking. However, if your printer has a touchscreen, use it to navigate to the Wireless Setup Wizard from the Setup or Network menu.
On your device, launch the HP Smart app, and tap on the "Add a new printer" or the plus sign to start the setup.
Let the app search for the nearby printers, and when it appears in the list, select it.
Select your office or home Wi-Fi network from the list, and input the correct password (Note: You can check the wireless network username and password on the back of the router).
Finally, the Wi-Fi light will flash solid on the printer, indicating that it has been set up on a wireless network.
Method 2: Using the WPS Button
Wi-Fi Protected Setup is another method to connect an HP Bluetooth printer to a wireless network. Before proceeding with this setup, ensure that your router has a WPS push button. If yes, only then use this method. Here are the steps to set up the printer via the WPS method.
Go to the Wireless Setup or Network menu on the printer and choose the WPS or Wi-Fi Protected Setup option.
Press the WPS button on the router and hold it for a few seconds until the light starts blinking.
Wait for the wireless connection to develop between the printer and the router. They will connect automatically.
Finally, your HP Bluetooth Printer will connect to the wireless network.
Troubleshooting Wi-Fi Connection of HP Bluetooth Printer
Sometimes, the printer may have trouble connecting to a wireless network. It happens due to a weak network connection, technical issues with the printer, or the router. In this situation, you need a few troubleshooting methods to fix the problem and connect the printer to Wi-Fi successfully.
The connection issue may be caused by these reasons:
Weak or no internet connection.
Incorrect Wi-Fi password.
Using an incorrect network.
The router and printer are too far apart from each other.
However, you can fix all these problems simply by using these troubleshooting methods.
Solution 1: Check Your Internet Speed
The HP printer may show a problem with the internet connection due to a weak internet speed. If the internet speed is below the requirement, it will prevent the printer's connection with the wireless network.
To check the internet speed, search for an online speed test on the computer connected to the same network. If the internet speed is low, restart the router. To restart, disconnect the router from the wall outlet and reconnect it after a few minutes.
Solution 2: Check the Wi-Fi Password
If your Wi-Fi password is incorrect, it will cause a problem with the printer connection. Therefore, ensure that you have entered the right password. Check the capitalization, special characters, etc., in the password.
Solution 3: Connect to the Right Network
It's possible that you have selected the wrong wireless network from the list. So, even if you are entering the right password, it doesn't work for the connection. Therefore, recheck the network and reset the connection.
Solution 4: Move the Printer Closer to the Router
When your printer is placed far from a router, it may cause network issues. Therefore, check the distance between your printer and router, and bring them closer if they are too far from each other.
Frequently Asked Questions
Question
How Do I Know if My HP Bluetooth Printer Supports Wi-Fi Connectivity?
You can check the printer's wireless connectivity by locating a Wi-Fi button on the display or the network settings in the printer's settings. Plus, the easiest way to confirm is by checking the printer model on the internet. It will tell everything about the printer's connectivity.
Question
How to Connect HP Bluetooth Printer to Wi-Fi?
There are a few methods to connect an HP Bluetooth printer to Wi-Fi. For instance, using the printer's touchscreen or the WPS push button on the printer and the wireless router. Some HP printers have a separate Wi-Fi button that you can press along with the Cancel button.
Question
What if My HP Bluetooth Printer Doesn’t Connect to Wi-Fi?
If the printer doesn’t connect to Wi-Fi, it may happen when the internet connection is weak, you input the wrong password, or choose the wrong network connection. To fix this issue, check the internet speed, ensure that the password and network connection are correct. Besides, keep the printer and the router closer to allow the printer to receive the signal.
Comments